Cooling Product OPTI-2410

Contains a state of the art cooling product. Contains Molybdate for easy testing. Contains Terpolymer, Ferrous & Non-Ferrous metal inhibitors for complete scale and corrosion protection.

Maintain normal dosage of 1.5-2.0 Moly 6+. For heavily scaled system it is possible to use this product @ 3-5 ppm moly6+ and slowly clean-up a system. With the Molybdate testing system you are ensured of accurate dosing and repeatable results. Results of being scale free,and low corrosion rates.

Testing Parameters
Molybdenum as MO+6 1.5-2.0 ppm
Polymer as PTU 1.5-3.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 10 bs

Cooling Product OPTIMUM 27

Contains a blend of polyphosphates to act as a cathodic inhibitor for low-hardness water. Low hardness waters less than 5 ppm TH in make-up. This product also contains a Terpolymer for superior sludge control.

Maintain Normal dosage of 1.0-2.0 ppm Moly6+. With Molybdate testing system you are ensured of accurate dosing and repeatable results. Results of being scale free, and low corrosion rates.

Testing Parameters
Molybdenum as MO+6 1.5-2.0 ppm
Polymer as PTU 1.0-2.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 8 lbs

Cooling Product OPTI 3307

All Organic, state of the art Cooling Tower Treatment ContainsTerpolymer, Ferrous & Non-Ferrous metal inhibitors for complete scale and corrosion protection.

Maintain normal dosage of 2.0-3.0 Phoshonate(HEDP). For heavily scaled system it is possible to use this product @ 3-5 ppm Phosphonate(HEDP) and slowly clean-up a system.

This product will produce results of being scale free, and low corrosion rates with a NO Moly Formula

Testing Parameters
Phosphonate(HEDP)2-3 ppm
Polymer as PTU 1.5-3.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 9 bs

Cooling Product OPTIMUM 10

Contains a blend of polyphosphates to act as a cathodic inhibitor for low-hardness water. This product also contains a Terpolymer for superior sludge control. Also contains a yellow metal inhibitor NO MOLYBDATE

Maintain normal dosage of 2.0-3.0 Poly phosphate digested. For heavily scaled system it is possible to use this product @ 3-5 ppm Polyphosphate and slowly clean-up a system.

This product will produce results of being scale free,and low corrosion rates with a NO Moly Formula

Testing Parameters
PolyPhosphate 2-3 ppm
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 10 bs

Cooling Product OPTIMUM ONE

Contains a blend of Ferrous & Non-ferrous metal inhibitors for complete scale protection, contains an alkalinity builder for low Ph waters. Contains an increased Terpolymer for higher skin temperatures and stressed situations.

Testing Parameters
Phosphonate(HEDP)5-7 ppm
Polymer as PTU 2-6.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 9 lbs

Cooling Product OPTI-KLEEN

State of the art patented system cleaner. Opti-Kleen should be used in conjunction with a Solid Approach biocide or another bio dispersant. Opti-Kleen is environmentally safe, biodegradable and considered a bio-film dispersant.

Add approximately 1.5 gal per 1000 gallons of tower water at standard 5 psi rating. This is for normal Once a week dosage used in conjunction with alternating biocide or other biofilm dispersant .

Check efficiency through use of paddle testers for standard plate count. For heavily fouled system add 2.5 gallons of above mixture weekly. As with all biocides Opti-kleen works best with bleed lockout timer.

Opti-Kleen does not have to be EPA registered so can reduce reporting as well as reporting end-user.

Testing Parameters
Maintain Once a week dosage
Feed Rate 0.10 - 3.0 lbs per 1000 gallons MU / canister weight 8 bs

Cooling Product SPERSE ALL

Sperse-all contains a perfect blend of enhanced biofilm dispersants. SperseAll contains metal inhibitors to further add corrosion protection to the tower loop.

SperseAll can be used in conjunction with Opti-Kleen providing a non regulated program maintaining Tower and equipment free of biological debris. SperseAll is environmentally safe, biodegradable and considered a bio-film dispersant. Add approximately 1/2 gal per 1000 gallons of tower water at standard 5 psi rating. This is for normal once a week dosage used in conjunction with alternating biocide or other biofilm dispersant.

Check efficiency through use of paddle testers for standard plate count. For heavily fouled system add 2.5 gallons of above mixture weekly. As with all biocides SperseAll works best with bleed lockout timer.

SperseAll does not have to be EPA registered so can reduce reporting as well as reporting end-user.

Testing Parameters
Maintain Once a week dosage
Feed Rate 0.10 - 3.0 lbs per 1000 gallons MU / canister weight 8 bs

Cooling Product ZGuard 2499

Contains a state of the art, alkaline, phosphate, zinc based cooling product. Easily tested for for contains Polymer, Ferrous & Non-Ferrous metal inhibitors for complete scale and corrosion protection program.

Maintain normal dosage of 1.0-1.5 Zinc ppm. This product contains ZINC and is used primarily for increased corrosion protection in systems that are not environmentally sensitive.

Testing Parameters
Zinc 1-1.5 ppm
Polymer as PTU 1.5-3.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 10 bs

Cooling Product ZGuard 2501

Contains a state of the art, zinc chloride based cooling product that is easy to test. Contains Polymer, Ferrous & Non-Ferrous metal inhibitors for complete scale and corrosion protection.

Maintain normal dosage of 1.0-1.5 Zinc ppm. . This product contains ZINC and is used primarily for increased corrosion protection in systems that are not environmentally sensitive.

Testing Parameters
Zinc 1-1.5 ppm
Polymer as PTU 1.5-3.0 units
Feed Rate 0.04 lbs per 1000 gallons MU(based upon 5 cycles) / canister weight 10 bs

Cooling Product PH MINUS

Contains essentially 99.5%active Sulfamic Acid. Utilized in existing cooling systems where PH control is utilized. Maintain Ph as desired.

PH Minus will extend the calcium solubility while lowering Ph if needed for added Galvanic Protection.

TESTING PARAMETERS
PH maintain recommended levels for galvanization,passivating or for for Ph control in
cooling water loops.

Cooling Product Sump Buddy

Sump Buddy solid is a blend of Organo-Nitrogen technology packaged in solid canister.

This product gives outstanding success in killing Algae, Fungi and Bacteria.
Especially effective against Aerobic Slime formers. This product is EPA registered but has a very favorable environmental properties as the active ingredient is non-persistent and degrades to naturally occuring products. This product is very cost effective vs ISO or Glutaraldehyde.

Its dosage is regulated by paddle testing and in most instances a once a week
dosage is sufficient. It should be used alternately with Opti-Kleen.

This combination is effective in guarding against Legionella growth. Legionella
testing should be performed to test dosages and killing efficiency.

Dosage is 0.1-1.5 lbs per 1,000 gallons of system water
Sump Buddy contains 40% active DBNPA . (2,2-dibromo-3-nitrilopropionamide)

Cooling Product Purobrom

Purobrom is a heavy oxidizer for tough systems that require bromine. Purobrom is an alternating biocide, it utilizes bromine technology for a highly effective killing of microorganisms.

This product is a heavy oxidizer and will clean-up, the heaviest fouled system. When used as directed will effectively control Algae, Bacteria and fungi in commercial /industrial power cooling systems. It should be used alternately with Opti- Kleen.

This combination is effective in guarding against Legionella growth. Legionella testing should be performed to test dosages and killing efficiency.

Dosage is 0.1-3.0 lbs per 1,000 gallons of system water
Purobrom contains 92.5% 1-Bromo-3chloro-5,5-dimethylhydantoin

Cooling Product BT-925

BT-925 is an oxidizing biocide.